Water Ring Film Pelletizing Line Description:
Water ring film pelletizing line consists of a die, water circulation room, pelletizer, flushing channel, centrifugal hydroextractor and a circulating water-cooling system. Plastic films are melted and discharged through the extruder, then discharged through the die. During discharge, plastic films are cut by high-speed rotating blades and the plastic pellets are shaken off; after which the pellets are cooled and carried off by circulating water film to the water circulation room.
Water ring pelletizing line is currently mainly used for PE, LDPE, HDPE, PP etc. The features of this water ring pelletizing line include: the die surface does not make direct contact with water, low costs from die and blade wear, as well as producing pellets of consistent sizes and shapes after passing through the water circulation (die surface) pelletizer.
Water Ring Pelletizing Line Application:
Water Ring Pelletizing Line Video:
Learn more about YouTube’s water ring pelletizing line
Water Ring Pelletizing Line Technical Parameter:
| FS series single-stage granulator machine | ||||||
|---|---|---|---|---|---|---|
| Model | Extruder | Screw diameter(mm) | L/D ratio | Power(kw) | Productivity(PE)(kg/h) | Productivity(PP)(kg/h) |
| FSJ70 | 70/33 | φ70 | 33:1 | 110 | 110-150 | 100-130 |
| FSJ85 | 85/33 | φ85 | 33:1 | 150 | 180-250 | 150-200 |
| FSJ100 | 100/33 | φ100 | 33:1 | 210 | 280-350 | 250-300 |
| FSJ130 | 130/33 | φ130 | 33:1 | 300 | 480-550 | 400-480 |
| FSJ160 | 160/33 | φ160 | 33:1 | 370 | 650-750 | 550-650 |
| FSJ180 | 180/33 | φ180 | 33:1 | 460 | 800-1000 | 750-850 |
| FS series double-stage granulator machine | ||||
|---|---|---|---|---|
| Model | FSJ100/120 | FSJ130/130 | FSJ160/160 | FSJ180/200 |
| First extruder parameter | ||||
| Screw diameter(mm) | φ100 | φ130 | φ160 | φ180 |
| L/D ratio | 33 | 33 | 30 | 30 |
| Extruder motor(kw) | 90 | 132 | 185 | 250 |
| Heating power(kw) | 45 | 55 | 70 | 70 |
| Screw speed(RPM) | 0-120 | 0-120 | 0-120 | 0-120 |
| Second extruder parameter | ||||
| Screw diameter(mm) | φ120 | φ130 | φ160 | φ200 |
| L/D ratio | 10-15 | 10-15 | 10-15 | 10-15 |
| Extruder motor(kw) | 30 | 45 | 55 | 75 |
| Heating power(kw) | 30 | 35 | 45 | 60 |
| Screw speed(RPM) | 0-120 | 0-120 | 0-120 | 0-120 |
| Productivity(kg/h) | 250-350 | 400-550 | 500-700 | 800-1000 |