Compactor pelletizing line is to treat pe pp film / woven bags with single stage or double stage, film can be plasticized well no air hole in granules.
Compactor pelletizing line is to treat pe pp film / woven bags with single stage or double stage, film can be plasticized well no air hole in granules.
Through belt conveyer convey the PP/PE film to compactor. Then the material will be cutted, then forced into extruder, cutting, water flume, dewatering machine, lastly blowing into storage hopper. Based on your requirements, you can choose compactor single stage granulator or double stage granulator.
1.The compactor pelletizing machine is washing and granulating in one go. Mainly includes washing system and granulating system. According to dirty degree of the material, the pelletizing machine will be different.
2.Usually the final moisture content after washing system is around 3-5%.
3.Compactor pelletizing machine is crushing, aggregator, granulatig all-in-one. Film feeds by belt conveyor to cutting compaction system, no need crusher to crushing film into pieces.
Learn more about YouTube’s compactor pelletizing line
FS series single-stage granulator machine | ||||||
---|---|---|---|---|---|---|
Model | Extruder | Screw diameter(mm) | L/D ratio | Power(kw) | Productivity(PE)(kg/h) | Productivity(PP)(kg/h) |
FSJ70 | 70/33 | φ70 | 33:1 | 110 | 110-150 | 100-130 |
FSJ85 | 85/33 | φ85 | 33:1 | 150 | 180-250 | 150-200 |
FSJ100 | 100/33 | φ100 | 33:1 | 210 | 280-350 | 250-300 |
FSJ130 | 130/33 | φ130 | 33:1 | 300 | 480-550 | 400-480 |
FSJ160 | 160/33 | φ160 | 33:1 | 370 | 650-750 | 550-650 |
FSJ180 | 180/33 | φ180 | 33:1 | 460 | 800-1000 | 750-850 |
FS series double-stage granulator machine | ||||
---|---|---|---|---|
Model | FSJ100/120 | FSJ130/130 | FSJ160/160 | FSJ180/200 |
First extruder parameter | ||||
Screw diameter(mm) | φ100 | φ130 | φ160 | φ180 |
L/D ratio | 33 | 33 | 30 | 30 |
Extruder motor(kw) | 90 | 132 | 185 | 250 |
Heating power(kw) | 45 | 55 | 70 | 70 |
Screw speed(RPM) | 0-120 | 0-120 | 0-120 | 0-120 |
Second extruder parameter | ||||
Screw diameter(mm) | φ120 | φ130 | φ160 | φ200 |
L/D ratio | 10-15 | 10-15 | 10-15 | 10-15 |
Extruder motor(kw) | 30 | 45 | 55 | 75 |
Heating power(kw) | 30 | 35 | 45 | 60 |
Screw speed(RPM) | 0-120 | 0-120 | 0-120 | 0-120 |
Productivity(kg/h) | 250-350 | 400-550 | 500-700 | 800-1000 |